“ON DEMAND RESIN CHANNEL – The Morph Runner”
You will be amazed by our “morphing“ resin runner system where the reusable vacuum membrane actually can be made to form a resin flow channel but return to flat shape without wastage after resin fill. Unlike other consumable resin running systems, which can leave exothermic witness marks, waste resin and add time to clean-up processing after demould. The morph runner becomes a resin super highway (16mm wide channel) when required and is easily controlled to return flat after resin injection, pushing the remaining resin out of the channel and into the part, leaving no trace or clean-up processing.
The Morph Runner system is supplied in 3 convenient components, 2m lengths of straight channel, cross junctions and the Crows Foot resin feed. The channel and cross junction sections can easily be cut and pasted into any resin path configuration during vacuum membrane manufacture. The Crows Foot resin feed is an independent device that sits under the vacuum membrane and feeds resin into the Morph during injection.